Home   About us News   Products   Quality Assurance Service Commitment Contact us  
Product Category
 
  Oil well logging composite insulation tube
  Oil well logging composite insulation bar(FRP
  Bond application of Insulators & metal fitting
  Insulators' process and application
  Petrol logging calibration series products
  Tri-layered tube series products
  Composite material type series products
  Rubber plate series products
  Fiber Optic Cable Core
   FRP Glass Fiber Cable Strengthen Core
   KFRP Aramid Fiber Cable Strengthen Core
  Dust Colletor used Insulation shaft
  Rubber without magnetic centralizer
  Cementing rubber plug
  Heatproof lithium battery Housing for Oil well
  Macromolecule High Polymer Side Striking Insul
  Insulation column for electric furnace
  To be drilled by PDC drilling bit or rock bit
  Stratum tester FRP fender
  Fiberglass Sucker Rod
  Glass fiber pipe tank
  FRP protective fence for oil field pumping uni
  Oil drilling using cylinder liner
  KFRP Aramid Fiber Cable Strengthen Core

     

 
一、 Characters
 
1、Light weight and high strength: KFRP aramid fiber cable strebgthen core has low density and high strength, the strength and modulus exceed the steel wire and Fiber glass strengthen optical cable core mostly.
2、Low thermal expansion: The coefficient of linear expansion of KFRP optical cable core less than the steel wire and Fiber glass strengthen optical cable core in wide temperature range.
3、Impact and rupture resistant : Not only the KFRP optical cable core has high tensile strength(≥1700Mpa), but has impact resistant and rupture resistant, it will keep the 1300Mpa tensile strength even under the rupturing condition.
4、Good flexibility: KFRP optical cable core light texture, easy to bend, the minimum bending diameter only 24 times of diameter.
5、Make indoor cable compact structure, beautiful, outstanding performance of bending, especially suitable for complicated the indoor environment of the wiring.
 
二、Product Measurement: Standard diameter( Unit mm)

0.40
0.50
0.58

三、KFRP Technical Performance Index

Inspecting items
Technical Parameter
Appearance
No crack and impurity on surface
Color
Nature color
Outer diameter (mm)
D±0.05
Flatness ratio(%)
≤5
KFRP outer diameter (mm)
d±0.05
KFRP Flatness ratio of KFRP(%)
≤20
Density(g/cm3)
1.3~1.4
Tensile Strength (Mpa)
≥1700
Tensile modules of elasticity(Gpa)
≥50
Breaking elongation(%)
≤3.0
Min bending diameter (mm)
≤12
High temperature bending test
80℃、24h、Φ30mm, No rupture
Coating detachment rate(N)
≥20

Add: No.2 Caotan 9th South Road,Caotan Ecological Industrial,Park,E&T Development Zone,Xi’an,China
Tel: +86-29-86030283 86031636 86031942 Fax: +86-29-86031253 86030621
E-mail:info@richfrp.com E-mail:info1@richfrp.com  24 Hours Service Hotline : +86-18792660323